|
Jammy Agricultural Lighting is designed to exceed
the highest industry standards. All models exceed ASAE S279.14 requirements.
Available in all popular configurations, Jammy Ag Lights are among
the most durable and dependable lights on the market. All models
are constructed with high impact nylon housings, polycarbonate lenses,
stainless hardware and standard Weather Pack connectors. Designed
for easy retrofit, Jammy Ag Lights use industry standard mounting
configurations.
Available in LED, now you can enjoy the efficiency,
beauty, and long life of LED lighting. With fully potted circuit
boards and modular LED assemblies, Jammy Ag LED's have an expected
life of 100,000 hours. Vibration and corrosion resistant designs
mean no more tedious bulb changes. And our Low Profile design means
fewer broken lenses and housings.
Ag Single Dimensions: 5-29/32"L x 2-7/8"W
x 4-1/2"H
Ag Single Mounting: 2-1/2" Centers x 3"
Centers
Ag Double Dimensions: 11-5/8"L x 2-7/8"W
x 4-1/2"H
Ag Double Mounting: 2-1/2" Centers x 8"
Centers
Ag Lamp Upgrade/Retrofit from Competitor Models:
All Wesbar Single and Double lamps 826xxxx & 54209-xxx Series;
PM 308/309/319 Series; Command 009-2xxx Series
| Part # |
Description |
|
|
|
J-275-A
|
Amber LED Turn Signal / Ag Warning Lamp. Durable acrylic
lens sealed to black ABS base. 10 Diode design conforms to
ASABE 279.15 Standard, for use on agricultural equipment as
well as trucks and trailers. Low profile surface mount using
2 screws through lens on 5-3/4" Centers. Custom wire
termination available. Amp Draw: 250 mA @ 12 Volts.
Dimensions: 6.7" x 3.15" x 0.95"
Wiring: 6" Bare Wire Leads
Upgrade/Retrofit from Speaker Model 270
|
|
 |
|
J-275-R
|
Red LED Stop / Turn / Tail Lamp. 10 Diode design great for
RV and Cargo Trailer rear lighting. Low profile surface mount
using 2 screws through lens on 5-3/4" Centers. Durable
acrylic lens sealed to black ABS base. Custom wire termination
available. Amp Draw: 250 mA @ 12 Volts.
Dimensions: 6.7" x 3.15" x 0.95"
Wiring: 6" Bare Wire Leads
Upgrade/Retrofit from Speaker Model 270
|
|
|
|
J-AC1-AA
J-AC1-RB
|
LED Ag Single Lamp. 30 Diode Dual Side Ag Wanirning and Turn
Signal Lamp. 2 Wire w/p Connector, Amber/Amber Lenses.
LED Ag Single Lamp. 15 Diode Single Side Stop/Turn/Tail Lmap.
3 Wire w/p Connector Red/Black Lenses.
|
|
|
|
J-AC2-L3
J-AC2-R3
J-AC2-L4
J-AC2-R4
|
LED Ag Combo Double Left Side Lamp. Double Side Amber and
Single Side Red Lamps in one fixture. Amber/Red lens configuration
with 3 wire male w/p connector.
LED Ag Combo Double Right Side Lamp.Double Side Amber and
Single Side Red Lamps in one Fixture. Red/Amber lens configuration
with 3 wire male w/p connector.
LED Ag Combo Double Left Side Lamp. Double Side Amber and
Single Side Red Lamps in one Fixture. Amber/Red lens configuration
with 4 wire male w/p connector for Brake Function.
LED Ag Combo Double Right Side Lamp. Double Side Amber and
Single Side Red Lamps in one Fixture. Red/Amber lens configuration
with 4 wire male w/p connector for Brake Function.
|
|
|
|
J-755-AA
J-755-AR
J-755-RB
|
LED Dual Face Pedestal Lamp. Warning Light. Amber/Amber
Lens
LED Dual Face Pedestal Lamp. Stop / Tail / Turn Model.
Amber/Red
Lens.
LED Single Face Pedestal Lamp. Stop/Turn/Tail Model. Red
Lens Black Back
|
 |
|
LED
| Incandescent | Wiring
| Reflectivity
Jammy Agricultural Lighting is designed to exceed
the highest industry standards. All models exceed ASAE S279.14 requirements.
Available in all popular configurations, Jammy Ag Lights are among
the most durable and dependable lights on the market. All models
are constructed with high impact nylon housings, polycarbonate lenses,
stainless hardware and standard Weather Pack connectors. Designed
for easy retrofit, Jammy Ag Lights use industry standard mounting
configurations.
Jammy Incandescent Ag Lamps utilize the same Low
Profile design and rugged construction as our LED counterparts.
With easily Removable Lenses, bulb changes are quick and easy.
Ag Single Dimensions: 5-29/32"L x 2-7/8"W
x 4-1/2"H
Ag Double Dimensions: 11-5/8"L x 2-7/8"W
x 4-1/2"H
Ag Lamp Upgrade/Retrofit from Competitor Models:
All Wesbar Single and Double lamps 826xxxx & 54209-xxx Series;
PM 308/309/319 Series; Command 009-2xxx Series
| Part
# |
Description |
|
| J-AB1-AA |
Ag Single Lamp. Double Side
Amber Warning and Turn Signal Lamp. 2 Wire male w/p Connector.
Amber/Amber Lens |
 |
|
J-AB1-RB
|
Ag Single Lamp. Single Side
Stop/Turn/Tail Lamp. 2 Wire male w/p Connector. Red/Black Lens |
 |
|
|
J-AB2-L3
J-AB2-R3
J-AB2-L4
J-AB2-R4
|
Ag Combo Double Left
Side Lamp. Double Side Amber and Single Side Red Lamps in
one Fixture. Amber/Red lens configuration with 3 wire male
w/p connector.
Ag Combo Double Right Side Lamp. Double Side Amber and Single
Side Red Lamps in one Fixture. Red/Amber lens configuration
with 3 wire male w/p connector.
Ag Combo Double Left Side Lamp. Double Side Amber and Single
Side Red Lamps in one Fixture. Amber/Red lens configuration
with 4 wire male w/p connector for Brake Function.
Ag Combo Double Right Side Lamp. Double Side Amber and Single
Side Red Lamps in one Fixture. Red/Amber lens configuration
with 4 wire male w/p connector for Brake Function.
|
|
|
|
|
| Part
# |
Description |
|
|
J-AEM
|
Ag Implement Enhance Flasher Lighting Module for Incandescent
and LED Agricultural Lights to meet ASAE S279 standards. Now
with smart universal design works with both LED and INC lights
for easy upgrade/retrofit. 4-Wire Input, 6 or 8 Wire Output.
Model shown: J-AEM-48
Special wire termination available.
Compatible with competitor models: Wesbar 108060, 108318,
108319; Peterson & JW Speaker Enhance Modules.
|
 |
|
|
J-AG2-WH
J-AG3-WH
J-AG4-WH
|
Wire Harness Adapter: 2 Way Weather Pack to 2 wire molded
.180 or individual bullet.
Wire Harness Adapter: 3 Way Weather Pack to 3-Way .180 Molded
Plug.
Wire Harness Adapter: 4 Way Weather Pack to .180 SQ-4 Plug.
|
 |
|
| J-AGM-WH |
Main Harness w/
7-Way Ag Plug |
 |
|
| J-AGW-WH |
Rear Wishbone
Harness |
 |
|
| J-7007-WH |
7-Way Plug (ATA/Ag/Round
Pin) with Spring Hanger |
 |
|
LED
| Incandescent | Wiring
| Reflectivity
|
|
| Part
# |
Description |
|
| J-PGR-9S |
2" H x 9" Ag Reflex Strip, Red
Mount: Tape Reflector
|
|
|
| J-PGY-9S |
2" H x 9" Ag Reflex Strip, Yellow
Mount: Tape Reflector
|
|
|
|
