7" Round White LED Backup/Reverse and Aux Dome Lamp. Certifed for use in single and double lamp reverse/backup lamp applications (SAE j593c) on School Buses or other vehicles. Fully sealed plastic lens and base for optimal water resistance. Uses 27 pcs potted Gen-2 Super-flux LED diodes for extreme output and long life. Full size rear gasket included. Brass reinforced screw bosses. Lens matches design of other 85 Series Lamps. Also great for use as auxiliary dome lighting or RV Scare Light.

Amp Draw: 700 mA

Dimensions: 7" Outer Diameter x 1.6" Deep (no gasket) / 1.75" deep (with Gasket)

Mounts on 6-1/8" to 6-1/4" Diameter Circle

Wiring: 11" Hot and Ground lead wires, no termination

Lens Color: Clear

7" Round LED Stop / Tail / Turn Bus & Transit Lamp. Sealed Lens includes Class A Reflex. 27 fully potted superflux diodes with light optimizing lens optics. Brass reinforced screw bosses. Rear gasket inclulded. Ecxeeds SAE J585 / J586 / J588 specs for DOT, FMVSS 108 and CMVSS Standards.

Amp Draw: Tail = 100 mA / Stop = 700 mA

Dimensions: 7" Outer Diameter x 1.6" Deep (no gasket) / 1.75" deep (with Gasket)

Mounts on 6-1/8" to 6-1/4" Circle

Wiring: 11" lead wires, no termination

Lens Color: Red

Download Spec Sheet Printable PDF

7" Round LED Park and Turn Signal Bus & Transit Lamp. Sealed Lens includes Class A Reflex. 27 fully potted superflux diodes with light optimizing lens optics. Brass reinforced screw bosses. Rear gasket inclulded. Ecxeeds SAE J585 / J586 / J588 specs for DOT, FMVSS 108 and CMVSS Standards.

Amp Draw: Park = 100 mA / Turn = 740 mA

Dimensions: 7" Outer Diameter x 1.6" Deep (no gasket) / 1.75" deep (with Gasket)

Mounts on 6-1/8" to 6-1/4" Circle

Wiring: 11" lead wires, no termination

Lens Color: Amber

Download Spec Sheet Printable PDF

7" Round LED School Bus Warning Light. Features Dual Mode Operation with Fail Safe Auto Flasher built in. Using only Eight of the latest generation High Power LED Diodes, these lamps reach incredible brightness with fewer components than competitors' models, for fewer failure points and more reliable operation. Custom Optics for High Angular Visibility. Brass reinforced screw bosses and included rear foam gasket make installation or upgrade simple and easy. Exceeds SAE J887, DOT W2, FMVSS 108 & CMVSS Standards for School Bus Warning Lamps.

Mode1 = Red (+), White (-): Aux Alternating Flasher Controlled Steady Flash w/ Built In Fail Safe Flash. If no flash signal is received, the lamp will automatically flash at a rate of 75 - 80 flashes per minute.

Mode 2 = Red (+), White & Black (-): Strobe Flashing at a rate of 10 flashes per second. Works in conjunction with Aux alternating flasher circuitry.

Max Amp Draw = 1.0 Amps @ 13.8 Volts DC

Designed to operate from 9 - 16 Volts

Dimensions: 7" Outer Diameter x 1.6" Deep (no gasket) / 1.75" deep (with Gasket)

Mounts on 6-1/8" to 6-1/4" Circle

11" Lead Wires

Download Spec Sheet Printable PDF