|
|
J-275-A
|
Amber LED Turn Signal / Ag Warning Lamp. Durable acrylic
lens sealed to black ABS base. 10 Diode design conforms to
ASABE 279.15 Standard, for use on agricultural equipment as
well as trucks and trailers. Low profile surface mount using
2 screws through lens on 5-3/4" Centers. Custom wire
termination available. Amp Draw: 250 mA @ 12 Volts.
Dimensions: 6.7" x 3.15" x 0.95"
Wiring: 6" Bare Wire Leads
|
|
 |
|
J-275-R
|
Red LED Stop / Turn / Tail Lamp. 10 Diode design great for
RV and Cargo Trailer rear lighting. Low profile surface mount
using 2 screws through lens on 5-3/4" Centers. Durable
acrylic lens sealed to black ABS base. Custom wire termination
available. Amp Draw: 250 mA @ 12 Volts.
Dimensions: 6.7" x 3.15" x 0.95"
Wiring: 6" Bare Wire Leads
|
|
|
| J-35-RK |
3" x 5" LED lamp kit - w/ lamp, J-30-GM
grommet & harness. 15 Diode Configuration
Wiring: 3 Way Female, Uses J-60-WH
Lens Color: Red
|
|
|
| J-35-AK |
3" x 5" LED lamp kit - w/ lamp, J-30-GM
grommet & harness. 15 Diode Configuration
Wiring: 3 Way Female, Uses J-60-WH
Lens Color: Amber
|
|
|
| J-35-CK |
3" x 5" LED lamp kit - w/ lamp, J-30-GM
grommet & harness. 24 Diode Configuration
Wiring: 3 Way Female, Uses J-60-WH
Lens Color: Clear
|
|
|
| J-37-R |
15 Diode 3”x5” Slim LED S/T/T Surface Mount Lamp.
4 srews.
Wiring: 4" Leads
Lens Color: Red
|
|
|
| J-37-A |
15 Diode 3”x5” Slim LED S/T/T Surface Mount Lamp.
4 srews.
Wiring: 4" Leads
Lens Color: Amber
|
|
|
| J-75 |
8" x 2-3/4" Submersible LED Combinaiton Lamp - Curbside.
17 Diode Configuration
Wiring: 14" blunt cut lead wires w/ ring terminal on ground
Mount: 2 Bolts on 2" centers, hardware supplied
Lens Color: Red
|
|
|
| J-75L |
8" x 2-3/4" Sumbersible LED Combination Lamp - Streetside
w/ license illuminator. 21 Diode Configuration
Wiring: 14" blunt cut lead wires w/ ring terminal on ground
Mount: 2 Bolts on 2" centers, hardware supplied
Lens Color: Red
|
|
|
| J-72 |
LED Low profile Submersible
combination lamp. 18 Diode Configuration for multiple function
use as Stop/Turn Light, Tail Light, Rear Clearance Light,
Side Marker Light, Rear Reflex Reflector and Side Reflex Reflector.
Uses Marine Grade Tinned Wire and Sealed Capsule Design for
protection against harsh salt water environment.
6-1/8” L x 3-5/8” W x 2-1/4” D with mounting
bolts (Curb Side)
Wiring: 8" w/plug 6" Ground Wire
Mount: 2 Studs
Lens: Red
|
 |
|
| J-72-L |
LED Low profile Submersible
combination lamp with License Illuminator. 23 Diode Configuration
for multiple function use as Stop/Turn Light, Tail Light,
Rear Clearance Light, Side Marker Light, Rear Reflex Reflector,
Side Reflex Reflector and License Light. Uses Marine Grade
Tinned Wire and Sealed Capsule Design for protection against
harsh salt water environment.
6-1/8” L x 3-5/8” W x 2-1/4” D with mounting
bolts (Street Side)
Wiring: 8" w/plug 6" Ground Wire
Mount: 2 Studs
Lens: Red
|
|
|
| J-7525-R |
LED 4” Round Pedestal Mount Stop Lamp with Single Stud
and Clamp. 12 Diode Configuration
Wiring: 9” Hot Leads, Self Grounding
Lens Color: Red
|
|
|
| J-85-R |
7" Round LED S/T/T bus lamp w/ rear gasket. 27 Diode
Configuration
Wiring: 11" lead wires, no termination
Lens Color: Red
|
|
|
| J-85-A |
7" Round LED CL/MK/Turn lamp w/ rear gasket. 27 Diode
Configuration
Wiring: 11" lead wires, no termination
Lens Color: Amber
|
|
|
|
J-84-R
J-84-A
|
7" Round LED School Bus Warning Light. Features Dual
Mode Operation with Fail Safe Auto Flasher built in. Using
only Eight of the latest generation High Power LED Diodes,
these lamps reach incredible brightness with fewer components
than competitor's models, for fewer failure points and more
reliable operation. Custom Optics for High Angular Visibility.
Brass reinforced screw bosses and included rear foam gasket
make installation or upgrade simple and easy. Exceeds SAE
J887, DOT W2, FMVSS 108 & CMVSS Standards for School Bus
Warning Lamps.
Mode1 = Red (+), White (-):
Aux Alternating Flasher Controlled Steady Flash w/ Built In
Fail Safe Flash. If no flash signal is received, the lamp
will automatically flash at a rate of 75 - 80 flashes per
minute.Mode 2 = Red (+), White & Black (-): Strobe Flashing
at a rate of 10 flashes per second. Works in conjunction with
Aux alternating flasher circuitry.
Max Amp Draw = 1.0 Amps @ 13.8 Volts DC
Designed to operate from 9 - 16 Volts
Dimensions: 7" Outer Diameter x 1.6" Deep (no gasket)
/ 1.75" deep (with Gasket)
Mounts on 6-1/8" to 6-1/4" Circle
11" Lead Wires
|
|
|
| J-4512-R |
4" Round LED lamp. 12 Diode Configuration available
in Amber, Red, or Clear. Lamp only.
Wiring: 3 Way Female, Uses J-60-WH,
Multi-Volt or 24 Volt available upon request
Mount:Grommet
Lens Color: Red
|
 |
|
| J-4512-A |
4" Round LED lamp. 12 Diode Configuration available
in Amber, Red, or Clear. Lamp only.
Wiring: 3 Way Female, Uses J-60-WH,
Multi-Volt or 24 Volt available upon request
Mount:Grommet
Lens Color: Amber
|
 |
|
| J-4512-C |
4" Round LED lamp. 12 Diode Configuration available
in Amber, Red, or Clear. Lamp only.
Wiring: 3 Way Female, Uses J-60-WH,
Multi-Volt or 24 Volt available upon request
Mount:Grommet
Lens Color: Clear
|
 |
|
J-4512-RC
J-4512-AC |
4" Round LED lamp. 12 Diode Configuration available
in Amber, Red, or Clear. Lamp only.
Wiring: 3 Way Female, Uses J-60-WH,
Multi-Volt or 24 Volt available upon request
Mount:Grommet
Lens Color: Clear, Red or Amber
diodes
|
|
|
| J-4512-RK |
4" Round LED lamp kit - w/ lamp, J-40-GM
grommet & harness. 12 Diode Configuration available in
Amber, Red, or Clear.
Wiring: Multi-Volt or 24 Volt available upon request
Lens Color: Red
|
 |
|
| J-4512-AK |
4" Round LED lamp kit - w/ lamp, J-40-GM
grommet & harness. 12 Diode Configuration available in
Amber, Red, or Clear.
Wiring: Multi-Volt or 24 Volt available upon request
Lens Color: Amber
|
 |
|
| J-4512-CK |
4" Round LED lamp kit - w/ lamp, J-40-GM
grommet & harness. 12 Diode Configuration available in
Amber, Red, or Clear.
Wiring: Multi-Volt or 24 Volt available upon request
Lens Color: Clear
|
 |
|
J-4512-RCK
J-4512-ACK |
4" Round LED lamp kit - w/ lamp, J-40-GM
grommet & harness. 12 Diode Configuration available in
Amber, Red, or Clear.
Wiring: Multi-Volt or 24 Volt available upon request
Lens Color: Clear, Red or Amber
diodes
|
|
|
| J-45-A |
4" Round LED lamp. 7 Diode Configuration
Wiring: 3 Way Female, Uses J-60-WH
Lens Color: Amber
|
|
|
| J-45-R |
4" Round LED lamp. 7 Diode Configuration
Wiring: 3 Way Female, Uses J-60-WH
Lens Color: Red
|
|
|
| J-45-AK |
4" Round LED lamp kit - w/ lamp, J-40-GM
grommet & harness
Wiring: 3 Way Female, Uses J-60-WH
Lens Color: Amber.
|
|
|
| J-45-RK |
4" Round LED lamp kit - w/ lamp, J-40-GM
grommet & harness
Wiring: 3 Way Female, Uses J-60-WH
Lens Color: Red.
|
|
|
|
|
All Jammy lighting has been photometrically tested
to exceed SAE/DOT specifications as set forth in FMVSS 108. We use
fully accredited stateside laboratories to certify our products,
but maintain in house photometric testing equipment to ensure consistent
quality. Test reports available upon request
Our LED lighting line is backed by our standard,
no hassle, 3 year warrantee. We only use the highest quality components
in our LED line – such as 4 post high output LED diodes rated
for 100,000 hours and silicone coated circuit boards for better
moisture and vibration resistance.
All LED lighting uses the same standard grommets,
brackets and wire harnesses as our incandescent line so there is
no need to purchase additional parts for your retrofit.
