LED Full Set Up Clam Shell Break Away System. Includes Battery Box, J-ELEC Breakaway Switch and Battery.

Mount: Use the two provided J-TAP self tapping bolts.

LED Full Set Up Trailer Breakaway System with battery, black powder coated mounting plate, removable plastic battery box, Built In Charger and breakaway switch. LED Charge Indicator Lights with Test Button. Silicon Potted Circuitry. Prewired with generous 12" Leads and ring terminal on ground wire. Kit includes J-ELEC Breakaway Switch & 12 Volt/5 Amp Battery.

Mount: Bolt on or weld

6" Oval Sealed LED Stop/Turn/Tail Lamp. Efficient and economical 7-Diode design meets FMVSS 108 requirements in any 360 degree orientation. Fits industry standard grommets and wiring. Available soon with Clear Lens/Red LED. 12 Volt only.

Wiring: 3-Way Female, uses J-60-WH

Amp Draw: 40 mA / 220 mA

Lens Color: Red

6" Oval Sealed LED Stop/Turn/Tail Lamp KIT. Efficient and economical 7-Diode design meets FMVSS 108 requirements in any 360 degree orientation. Fits industry standard grommets and wiring. Available soon with Clear Lens/Red LED. 12 Volt only. Packaged with J-67 Lamp, J-60-GM Grommet and
J-60-WH Wire Harness.

Wiring: 3-Way Female, uses J-60-WH

Amp Draw: 40 mA / 220 mA

Lens Color: Red

6" Oval Surface Mount LED Stop/Turn/Tail Lamp. Efficient and economical 7-Diode design meets FMVSS 108 requirements in any 360 degree orientation. Mount with #8 or smaller screws through integrated flange. Black or Chrome Trim Ring available:
J-65-BZB / BZC. 12 Volt only.

Wiring: Prewired with 6" Leads

Amp Draw: 40 mA / 220 mA

Turn Signal LED Stop/Tail/Turn Light Bar
( 15-1/2”L, 1-5/8”W, 3/4”H ),

Can be used with J-535-R mounting bracket

Wiring: 15" Leads (3 Wires)

Lens Color: Red also in Amber & Clear

Turn Signal LED Stop/Tail/Turn Light Bar
( 15-1/2”L, 1-5/8”W, 3/4”H ),

Can be used with J-535-RC mounting bracket

Wiring: 15" Leads (3 Wires)

Lens Color: Clear/Red Diod Amber Diod

LED 4” Round Pedestal Mount Stop Lamp with Single Stud and Clamp. 12 Diode Configuration

Wiring: 9” Hot Leads, Self Grounding

Lens Color: Red

15 Diode 3”x5” Slim LED S/T/T Surface Mount Lamp. 4 srews.

Wiring: 4" Leads

Lens Color: Red

15 Diode 3”x5” Slim LED S/T/T Surface Mount Lamp. 4 srews.

Wiring: 4" Leads

Lens Color: Amber

7" Round White LED Backup/Reverse and Aux Dome Lamp. Certifed for use in single and double lamp reverse/backup lamp applications (SAE j593c) on School Buses or other vehicles. Fully sealed plastic lens and base for optimal water resistance. Uses 27 pcs potted Gen-2 Super-flux LED diodes for extreme output and long life. Full size rear gasket included. Brass reinforced screw bosses. Lens matches design of other 85 Series Lamps. Also great for use as auxiliary dome lighting or RV Scare Light.

Amp Draw: 700 mA

Dimensions: 7" Outer Diameter x 1.6" Deep (no gasket) / 1.75" deep (with Gasket)

Mounts on 6-1/8" to 6-1/4" Diameter Circle

Wiring: 11" Hot and Ground lead wires, no termination

Lens Color: Clear

7" Round LED S/T/T bus lamp w/ rear gasket. 27 Diode Configuration

Wiring: 11" lead wires, no termination

Lens Color: Red

7" Round LED CL/MK/Turn lamp w/ rear gasket. 27 Diode Configuration

Wiring: 11" lead wires, no termination

Lens Color: Amber

7" Round LED School Bus Warning Light. Features Dual Mode Operation with Fail Safe Auto Flasher built in. Using only Eight of the latest generation High Power LED Diodes, these lamps reach incredible brightness with fewer components than competitor's models, for fewer failure points and more reliable operation. Custom Optics for High Angular Visibility. Brass reinforced screw bosses and included rear foam gasket make installation or upgrade simple and easy. Exceeds SAE J887, DOT W2, FMVSS 108 & CMVSS Standards for School Bus Warning Lamps.

Mode1 = Red (+), White (-): Aux Alternating Flasher Controlled Steady Flash w/ Built In Fail Safe Flash. If no flash signal is received, the lamp will automatically flash at a rate of 75 - 80 flashes per minute.Mode 2 = Red (+), White & Black (-): Strobe Flashing at a rate of 10 flashes per second. Works in conjunction with Aux alternating flasher circuitry.

Max Amp Draw = 1.0 Amps @ 13.8 Volts DC

Designed to operate from 9 - 16 Volts

Dimensions: 7" Outer Diameter x 1.6" Deep (no gasket) / 1.75" deep (with Gasket)

Mounts on 6-1/8" to 6-1/4" Circle

11" Lead Wires

Amber LED Turn Signal / Ag Warning Lamp. Durable acrylic lens sealed to black ABS base. 10 Diode design conforms to ASABE 279.15 Standard, for use on agricultural equipment as well as trucks and trailers. Low profile surface mount using 2 screws through lens on 5-3/4" Centers. Custom wire termination available. Amp Draw: 250 mA @ 12 Volts.

Dimensions: 6.7" x 3.15" x 0.95"

Wiring: 6" Bare Wire Leads

Red LED Stop / Turn / Tail Lamp. 10 Diode design great for RV and Cargo Trailer rear lighting. Low profile surface mount using 2 screws through lens on 5-3/4" Centers. Durable acrylic lens sealed to black ABS base. Custom wire termination available. Amp Draw: 250 mA @ 12 Volts.

Dimensions: 6.7" x 3.15" x 0.95"

Wiring: 6" Bare Wire Leads

7/8 Function Slim LED Combination Lamps. Featuring Multi-Flex faceted reflector technology and sealed capsule construction. Universal stud mounting for use on all size trailers, including Over 80" applications. Connect with pre-attached tin wire leads. 8-Function left (street side) lamp, Model J-2077L, has 20 diodes including license illuminator. 7-Function right (curb side) lamp, Model J-2077, has 18 diodes.

Amp Draw: 430 mA Max @ 12 Volts

Operating Range: 9 - 16 Volts

Dimensions: 5.60W" x 4.58H" x 1.97”D

Wiring: 13” Tail/Stop/Ground Leads